News
News
Marine bearing replacement method overview
Release time:
2024-04-29
Marine bearings must be kept in close fit with the seat hole to prevent loosening and rolling during operation. The size, cylindricity and roundness of the bearing bush seat hole of the ship shall meet the requirements and have the feeling of saving labor. If the bearing shoe is easy to install, it means that the elasticity of the marine bearing shoe is insufficient or the height of the bearing shoe is too small.
Marine bearings must be kept in close fit with the seat hole to prevent loosening and rolling during operation. The size, cylindricity and roundness of the bearing bush seat hole of the ship shall meet the requirements and have the feeling of saving labor. If the bearing shoe is easy to install, it means that the elasticity of the marine bearing shoe is insufficient or the height of the bearing shoe is too small.
When the marine bearing bush is in a free state, the two end faces should be higher. When the bearing pad is pressed into the middle of the bearing seat, its end surface should be higher than the boundary surface of the bearing seat. When the bearing cover is tightened too tightly, the marine bearing sleeve will be deformed to a too small height, and there will be a gap at the connection, which cannot guarantee the tightness of the marine bearing fit, resulting in loosening and rolling during operation. If it is too high, you can file it flat or put sandpaper flat on the glass. Tiles with too small height should be reselected and polished by hand.
Contact Us
Telephone:
+86-0754-83891428
+86-0754-83891438
E-mail:994772352@qq.com
Address: Gushuai Industrial Zone, Chaoyang District, Shantou City